TEL: 0755-33115661
JIG减速机

Industry news

Contact information

Tel:86-0755-33115661
Fax:86-0755-33115662
Emall:280397167@qq.com
Address:V in Shenzhen District of Baoan District city Songgang street, Sha Po Sha two new industrial zone A14 building

Hardened reducer

Industry news

Your present position:Home > News > Industry news
Note the reducer oiling

Reducer reducer refueling refueling precautions should pay attention to the following points: first, the new reducer first gas, production operation half a month later, the oil box body on the net, filling the new oil to the oil window line. No gear oil window horizontal gas, the speed reducer upper observation covers removed using probe dipstick vertically into the bottom (detection ruler vertical bottom), the oil level height is 55mm-65mm; it is forbidden to mix the new, the old oil. Two, Zhou Jian, monthly inspection inclined gear reducer reducer upper observation placement, will cover remove using probe inserted into the bottom of the oil dipstick vertical (vertical bottom detection ruler), 1 wheel reducer oil level height is 285mm-300mm, 2 wheel reducer oil level height is 215mm-225mm, 3 wheel speed reducer oil level height is 195mm-205mm (i.e. the level of more than the bottom ball). Three, Zhou Jian, monthly inspection inclined gear reducer reducer upper observation placement, will cover remove using probe inserted into the bottom of the oil dipstick vertical (vertical bottom detection ruler), 1 wheel reducer oil level height is 285mm-300mm, 2 wheel reducer oil level height is 215mm-225mm, 3 wheel reducer oil level height of 195mm-205mm (i.e. the level of more than the bottom ball). Four, Zhou Jian, monthly inspection worm reducer, the oil level in the oil to observe the oil window window midline. Five, gear reducer, cycloid reducer, worm gear reducer every six months and replaced with new oil, summer summer oil, winter winter oil replacement, the oil will be the old oil put clean, new and old oil mixed use is strictly prohibited. Oil cleaning before reducer upper end cover impurities, gas process is strictly prohibited the entry of foreign matter in the gear reducer reducer body wear, worm gear reducer, reduce the life, after the completion of the reducer oiling clean upper end cover impurities and timely cover, the upper cover and the gear box in connection with the sealing rubber filled to prevent oil leakage, an upper end cover under should be sealed and tightly combined with pad speed reducer.


TAG: